Industrial Clear
Industrial Clear Epoxy Resin
- Type
- Coating
- Data sheet revision
- not printed
- Sources checked
- 2026-09-30
- Page status
- Published October 3, 2026
A 2:1 clear coating epoxy for surfaces such as concrete, wood, countertops and table tops. Its data sheet gives 45 minutes of working time and an ideal range of 70 to 80 °F, but publishes no maximum thickness per coat.
Published values
Copied as printed, with test conditions where the manufacturer gives them. Tags link to the source document.
| Mix ratio by volume (A:B) | 2:1 parts by volumeTDS |
|---|---|
| Mix ratio by weight (A:B) | 100:54 parts by weightTDS |
| Maximum pour depth per layer | not published |
|---|---|
| Minimum pour depth | not published |
| Maximum mass or volume per pour | not published |
| Recommended temperature | Ideal 70°-80°F (21°-27°C); acceptable 50°-95°F (10°-35°C)TDSapplication temperature, ideal range; acceptable range 50-95°F (10-35°C) |
| Pot life | not published |
|---|---|
| Working time | 45 min (ASTM C881)TDSTDS properties at 77°F (25°C), ASTM C881 |
| Time between pours | not published |
| Recoat window | not published |
| Tack-free | not published |
| Demold | not published |
| Full cure | 7 daysPageno temperature stated; initial cure time 24 hours |
| Mixed viscosity | 900 cP @ 77°FTDSat 77°F, ASTM D2393 (D2196) |
|---|---|
| Specific gravity or density, Part A | 1.12 (published as 'Density', no unit)SDS ASDS section 9 'Density: 1.12' for the resin, printed without a unit and not labelled specific gravity (SDS revision February 2021) |
| Specific gravity or density, Part B | 1.03 (published as 'Density', no unit)SDS BSDS section 9 'Density: 1.03' for the hardener, printed without a unit and not labelled specific gravity (SDS revision February 2021) |
| Specific gravity, mixed | not published |
| Density, mixed | 9.2 lbs/galTDSTDS properties at 77°F (25°C) |
| Hardness | Shore D 83 (ASTM D2240)TDS |
What the manufacturer says
Paraphrased from the manufacturer’s documents.
Intended use
- Recommended uses include concrete, wood, metal, aggregates, pavement, countertops and table tops.TDS
Heat
- Heat resistance is listed as 190ºF (88°C).TDS
- Peak exotherm temperature is 150°F for a 100 g mass.TDS
Coverage
- The TDS gives coverage of about 30 sq ft per 48 oz and 120 sq ft per 1.5 gal at 20 mils thickness, varying with surface porosity and texture.TDS
Other notes
- The product page recommends stirring 4 minutes and pouring within 10 minutes of mixing, with an initial cure time of 24 hours.Page
UV and color
- The product page describes the formula as UV-resistant to help keep long-term clarity.Page
Safety data sheet summary
Signal word: WARNINGSDS A
Part A hazard statements
- H317 May cause an allergic skin reaction
Part B hazard statements
- H317 May cause an allergic skin reaction
Protective equipment
- Wear impervious gloves.
- Wear splash-proof chemical goggles.
- Use an organic-chemical cartridge respirator if needed in a non-vented area.
- The hardener SDS gives the same glove, goggle and respirator recommendations.
Ventilation
- Use good general mechanical ventilation plus local exhaust.
- The hardener SDS lists the same engineering controls.
A summary, not the full SDS. Read the SDS for both parts before use and follow its first-aid section in case of exposure. This is not medical advice.
Where the manufacturer’s documents disagree
- Coverage: 48 oz = 30 sq ft (approx.) @ 20 mils (TDS) vs. Covers up to 12 sq ft (48 oz kit product page) (TDS, Page).
- Specific gravity compared with the weight ratio: SDS densities 1.12 (resin) / 1.03 (hardener) vs. TDS 2:1 by volume with 100:54 by weight (SDS A, SDS B, TDS).
Not published
The documents listed below give no value for: Maximum pour depth per layer; Minimum pour depth; Maximum mass or volume per pour; Pot life; Time between pours; Recoat window; Tack-free; Demold; Specific gravity, mixed. We leave these blank rather than estimate them.
Use this product in a calculator
Sources
- Industrial Clear. INDUSTRIAL CLEAR TECHNICAL DATA SHEET (TDS). Accessed September 30, 2026.
- Industrial Clear. 48 oz Industrial Clear Epoxy Resin (Shopify product JSON) (Page). Accessed September 30, 2026.
- Industrial Clear. INDUSTRIAL CLEAR SDS - RESIN (SDS A). Document revision: Revision: February 2021. Accessed September 30, 2026.
- Industrial Clear. INDUSTRIAL CLEAR SDS - HARDENER (SDS B). Document revision: Revision: February 2021. Accessed September 30, 2026.