Epoxy product data compared
Every value in this table is copied from the manufacturer’s technical data sheet, safety data sheet or product page. “Not published” means we looked and the manufacturer does not state it. Open a product for the exact wording, test conditions and source links.
| Alumilite Amazing Clear Cast | Casting | 1:1 by weight or volume | 1:1 by weight or volume | 3/8" per layer | allow each layer to cure before adding the next (no time given) | 45-60 minutes | 3-5 Days | around 65-75°F |
|---|---|---|---|---|---|---|---|---|
| Alumilite Amazing Deep Pour | Deep pour | 2:1 by volume | not published | up to 2 inches thick in a single layer | not published | 60-90 minutes | 7-10 days | around 65-75°F |
| ArtResin ArtResin Epoxy Resin | Art resin | 1:1 (Resin/Hardener) by volume | 100:84 (Resin/Hardener) by weight | around 1/8" (3 mm) per pour | about 3-5 hours (gel stage) | 40-60 min at 23-25ºC / 72-77ºF | 72 h | 24-30ºC / 75-85ºF (room temperature should not fluctuate) |
| EcoPoxy FlowCast | Deep pour | 2:1 | 2.3:1 | 38mm (1.5") | 20-44 hours (tacky to touch period) | 8-12 hours | 7-14 days | 20-25°C (68-77°F) |
| EcoPoxy FlowCast SPR | Casting | 2:1 (A:B) by volume | 2.5:1 (A:B) by mass | 25mm (1") | at set to touch: 24 hours (25mm casting); 32 hours (13mm casting); then abrade | 4-5 hours (25mm casting); 6-7 hours (13mm casting) | 3 days (25mm casting); 7 days (13mm casting) | 20-25°C (68-77°F) |
| EcoPoxy SnowWhite | Deep pour | 2:1 | 3.1:1 | 38mm (1.5”) | 15-22 hours (tacky to touch period) | 7 hours | 3 days | 20-25°C (68-77°F) |
| EcoPoxy UVPoxy | Tabletop / coating | 1:1 | 1.2:1 | Up to 3.2mm (1/8”) | 4-10 hours (tacky to touch period) | 30-40 minutes | 48 hours | 20-25°C (68-77°F) |
| Entropy Resins CCR Clear Casting Epoxy Resin with CCS Clear Casting Slow Hardener | Casting | 2:1 by volume | 100:42 by weight (CCS Slow) | up to 1" deep per pour (CCS Slow) | when the previous 1" pour becomes tacky (feels like the backside of masking tape) | 360 min (@ 77ºF/25ºC) | 7 days @ 77ºF/25ºC, post cure recommended | not published |
| Industrial Clear Industrial Clear Epoxy Resin | Coating | 2:1 parts by volume | 100:54 parts by weight | not published | not published | 45 min (ASTM C881) | 7 days | Ideal 70°-80°F (21°-27°C); acceptable 50°-95°F (10°-35°C) |
| MAS Deep Pour Epoxy Resin | Deep pour | 3A : 1B by volume | 100A : 28B by weight | 0.5" for a full mixed 1.3 gallon kit, or 1" for a half mixed kit | not published | 3 hr working time | 24-36 hours at 70F | 60F-75F |
| MAS Deep Pour X Casting Epoxy Resin | Deep pour | 2A : 1B by volume | 100A : 44B by weight | 3" thick in a single pour | Typical time between pours 24-48hrs | up to 1 hour to mix and pour 5 gallons or less at 60-80°F | 5-7 days | 60°F-80°F |
| MAS Table Top Pro Epoxy Resin | Tabletop / coating | 1A : 1B by volume | 100A : 85B by weight | flood coats up to 1/8" thick | can usually be recoated in 4-8 hours without any additional prep work or sanding | 10-15 minutes (rough average for a full kit at room temp) | 5-7 days before putting into service | 70-80°F |
| Promise Epoxy Deep Pour Epoxy Resin | Deep pour | 2 Part Resin : 1 Part Hardener | not published | up to two-inch thick layers | roughly 48 hours (first pour firm but tacky) | 50-70 minutes | 7 days | 65-75°F |
| Promise Epoxy Fast Cure Deep Pour Epoxy | Deep pour | 1 Part Resin : 1 Part Hardener (by volume) | not published | layers of 1.5 in or less for pours of 2 gallons or more; up to 3 in thick in small quantities | after 24 hours | 1 hour once mixed | 3-5 days | 65ºF–75ºF (18ºC–24ºC) |
| Promise Epoxy Table Top Epoxy Resin | Tabletop / coating | 1 Part Resin : 1 Part Hardener | 100 A to 83 B | maximum of 1/4″ depth | after 4 hours; sand if more than 10 hours | 30-45 minutes | 3-5 days | 65-75°F |
| Smooth-On EpoxAcast™ 690 | Casting | not published | 100A : 30B by weight | 3/4" (1.9 cm) fan-cooled; 3/8 in. (0.95 cm) standard casting | allow previous layer to fully cure before pouring subsequent layers | 5 Hours | 24 Hours (standard casting method); 36 Hours (fan-cooled casting method) | 70°F/21°C |
| Smooth-On EpoxAcast™ 692 Deep Pour | Deep pour | not published | 100A : 40B by weight | 2" (5.08 cm) fan-cooled; 1 1/2" (3.81 cm) standard casting | allow previous layer to fully cure before pouring subsequent layers | 12 Hours | 72 Hours (standard casting method); 7 Days (fan-cooled casting method) | 70°F/21°C |
| Stone Coat Countertops Art Coat Epoxy | Tabletop / coating | 1 Resin : 1 Hardener | 100 R : 90 H | .25 inch | 14-24 hours | 55-75 minutes | 7 days | 65-75°F |
| Stone Coat Countertops Countertop Epoxy | Tabletop / coating | 1 Resin : 1 Hardener | 100 R : 90 H | .25 inch | 14-24 hours | 45-55 minutes | 7 days | 65-75°F |
| Superclear Liquid Glass Deep Pour Epoxy | Deep pour | 2:1 by Volume | 100 A to 44 B by Weight | up to 4” thick per pour | when the pour is tacky and nearly hard | 8 to 12 hours | 36-48 Hours | 70°F to 84°F |
| Superclear Table Top Epoxy | Tabletop / coating | 1:1 by Volume | 100 A to 83 B by Weight | up to 1/4” thick per pour | 2-4 hours | begins to thicken within 30 minutes | 24 Hours Depending On Thickness & Ambient Temperature | 70°F and 84°F |
| TotalBoat Artist Resin | Art resin | 1A:1B by volume | 1.11A:1B by weight | Up to 1/4" per coat (coatings); up to 2" (castings up to 10 fl. oz.) | 4 hours minimum at 70°F — no sanding required | 30 minutes at 70°F | 3-5 days (at 65-75°F) | 65-75°F |
| TotalBoat Fathom Deep Pour Epoxy | Deep pour | 2:1 (Resin:Hardener) by volume | 100:44 (Resin:Hardener) by weight | up to 3" per layer (casting in smaller mold, up to 1 mixed gallon); 2" for river tables and slab pours | minimum of 36 hours (conservative); at least 24 hours if the previous layer is below 85°F and firm | 4-6 hours | 5-7 days | 60-80°F |
| TotalBoat MakerPoxy Crystal Clear Artist's Resin by Jess Crow | Art resin | 1A:1B by volume | 100A:84B by weight | 1/8" to 1/4" per pour | generally 4-8 hours (when previous layer has cooled but can still be indented with a fingernail) | 10-60 minutes @ 77°F | 5-7 days @ 77°F | 70°F to 80°F |
| TotalBoat TableTop Epoxy | Tabletop / coating | 1A:1B by volume | 1.2A:1B by weight | Up to 1/4" per coat (coatings); up to 1" (castings up to 6 fl. oz.) | 3 hours minimum at 70°F — no sanding required | 40 minutes at 70°F | 5-7 days | 65-80°F |
| TotalBoat ThickSet Cast + Coat Deep Pour Epoxy | Casting | 1A:1B by volume | 1.11A:1B by weight | Up to ½" per coat (coatings); up to 2" (castings up to 10 fl. oz.) | 4 hours minimum at 70°F — no sanding required | 30 minutes at 70°F | 3-5 days (at 65-75°F) | 65-75°F |
| TotalBoat Wave + Marble Art Epoxy Resin | Art resin | 1A:1B by volume | 100A:86B by weight | Up to 1/4" per coat | 3 hours minimum at 70°F — no sanding required | 20 minutes at 70°F | 5-7 days | 70-80°F |
27 products. Source documents accessed 2026-09-30. Sort by any column; products that do not publish a value sort last.